BEFORE YOU INVEST IN AI: Is Your Hardwood Business Ready?

BEFORE YOU INVEST IN AI: Is Your Hardwood Business Ready?
The technology may be ready. The more important question is whether it will improve a decision enough to justify the cost, complexity, and organizational change.

At the NHLA Annual Convention in Cleveland in September, I heard both interest and caution about artificial intelligence (AI), automation, and advanced analytics. The conversations reflected a familiar reality: technology is moving quickly while investment decisions compete with difficult markets, workforce limitations, legacy equipment, and capital needs. Under those conditions, “Can AI do this?” may not be the best initial question. A better question may be whether AI technology can improve a defined decision enough to justify investment.
AI and advanced analytics are already being used across the forestry and wood products industry through machine vision, lumber grading, predictive maintenance, inventory management, production planning, and logistics. Some can improve yield, consistency, safety, or efficiency. Others may be technically impressive and still offer little practical value for a particular operation.
START WITH THE BUSINESS DECISION
A company doesn’t need to decide whether it is broadly “AI-ready.” That question is too abstract to be useful. Instead, companies should start with the decision or operating problem they need to improve.
Is the objective to improve grading consistency, reduce downtime, increase recovery, identify defects, forecast demand, or strengthen inventory control? Who makes that decision now? What information is used? How well does the current process perform? What does an error cost, and what level of improvement would matter?
Those questions establish a baseline without which there may be no defensible way to determine later whether the technology created value.
AI HAS TO BE BETTER THAN THE ALTERNATIVE
New technology should not be presumed better because it is new. AI s no exception, and should therefore be compared with realistic alternatives, including better calibration, improved sensing, process redesign, existing software, conventional statistical tools, employee training, or experienced human judgment.
In some cases, AI will provide capabilities that simpler approaches cannot. In others, a modest operational change may solve most problems at lower cost and with less disruption. Choosing the simpler option does not mean a company is falling behind. It means the company evaluated the technology against the business problem rather than adopting the technology for its own sake.
READINESS IS OPERATIONAL, NOT ABSTRACT
A successful demonstration may show that a given technology can work under test conditions; it does not establish that it will perform the same way in routine hardwood operations. Data may be incomplete, older and newer equipment may not communicate, outputs may arrive too late to improve the intended decision, or critical knowledge may reside with one employee, consultant, or vendor. These conditions can make a promising system difficult to integrate, use, or sustain.
Wood-products research shows that digital adoption depends on more than access to technology. Skills, infrastructure, integration, training, planning, and expected return all influence whether a given technology can be sustained.
The people who do the work should be involved early. Operators, graders, maintenance personnel, foresters, and managers often know where processes break down and what information would realistically help. Their knowledge is part of the evidence needed to decide whether a technology investment fits the operation.
COUNT THE FULL COST AND THE FULL VALUE
Purchase price is only part of the investment. Implementation also consumes staff time, management attention, training, data preparation, technical support, maintenance, and sometimes additional equipment or software. Once committed to the technology, those resources are no longer available for other operating, workforce, or capital needs; that tradeoff is part of the cost.
Value deserves the same scrutiny. In a mill, it may include greater yield, less downtime, better quality, improved safety, more consistent production, or reduced dependence on hard-to-fill positions. An investment makes sense when those gains are meaningful, durable, and large enough to justify the full implementation burden.
RESPONSIBILITY REMAINS HUMAN
AI can support a decision, but the people and organization using it remain accountable for the consequences. Before putting a system into use, the business should establish who will review its results and who has authority to question, override, or stop its operation. Testing and oversight should reflect the seriousness of a potential error and how difficult it would be to reverse its consequences. For example, employees reviewing a computer display of daily lumber production can check questionable totals against mill records before acting. A system that directly influences worker safety, lumber grading, or production commitments requires more rigorous testing under operating conditions and closer oversight because errors can affect people, product value, or customer obligations before they are corrected. In either case, employees need a practical fallback plan to keep work moving when results are unreliable or software, sensors, networks, or other components fail.
The accompanying AI Investment Decision Tool for Hardwood Businesses condenses these considerations into six questions. You can use it to organize evidence and spot warning signs before committing capital, staff time, or decision authority. It is not a scorecard; the importance of each question will vary with the application and consequences of error.
A disciplined AI evaluation does not have to end with a purchase. The decision may be to adopt, test further, simplify, delay, or decline. Each can be sound when supported by evidence.
The objective is not to make a hardwood business look technologically sophisticated; it is to improve decisions and operations. Start with the problem, compare credible alternatives, account for cost and value, keep responsibility clear, and require the technology to earn its place.
Selected Sources
Bumgardner, M., and U. Buehlmann. 2022. A Preliminary Assessment of Industry 4.0 and Digitized Manufacturing in the North American Woodworking Industry. Forest Products Journal 72(1):67–73. https://doi.org/10.13073/FPJ-D-21-00064
Legg, B., B. Dorfner, S. Leavengood, and E. Hansen. 2021. Industry 4.0 Implementation in US Primary Wood Products Industry. Drvna Industrija 72(2):143–153. https://doi.org/10.5552/drvind.2021.2017
Subedi, B., S. H. Gautam, and L. LeBel. 2026. Artificial intelligence in the forest products supply chain: Current applications and open challenges. Forestry: An International Journal of Forest Research 99(2):cpag010. https://doi.org/10.1093/forestry/cpag010
By JASON A. HUBBART





